YouVersion Logo
Search Icon

1 Kings 7

7
The Palace Built in 13 Years
1Solomon took 13 years to finish building his palace. 2He built a hall ⌞named⌟ the Forest of Lebanon. It was 150 feet long, 75 feet wide, and 45 feet high. It had four rows of cedar pillars supporting cedar beams. 3The hall was covered with cedar above the side rooms, which were supported by 45 pillars (15 per row). 4The windows were in three rows facing each other on opposite sides ⌞of the palace⌟. 5All the doors and doorframes were square. There were three doors facing each other on opposite sides ⌞of the palace⌟.
6Solomon made the Hall of Pillars 75 feet long and 45 feet wide. In front of the hall was an entrance hall with pillars.
7He made the Hall of Justice, where he sat on his throne and served as judge. The hall was covered with cedar from floor to ceiling.#7:7 Latin, Syriac; Masoretic Text “floor to floor.”
8His own private quarters were in a different location than the Hall of Justice, but they were similar in design. Solomon also built private quarters like this for his wife, Pharaoh’s daughter.
9From the foundation to the roof, all these buildings, including the large courtyard, were built with high-grade stone blocks. The stone blocks were cut to size and trimmed with saws on their inner and outer faces. 10The foundation was made with large, high-grade stones (some 12 feet long, others 15 feet long). 11Above ⌞the foundation⌟ were cedar beams and high-grade stone blocks, which had been cut to size. 12The large courtyard had three layers of cut stone blocks and a layer of cedar beams, like the inner courtyard of the Lord’s temple and the entrance hall.
The Temple Furnishings
(2 Chronicles 2:13–14; 3:15–5:1)
13King Solomon had Hiram brought from Tyre. 14Hiram was the son of a widow from the tribe of Naphtali. His father, a native of Tyre, was a skilled bronze craftsman. Hiram was highly skilled, resourceful, and knowledgeable about all kinds of bronze craftsmanship. He came to King Solomon and did all his ⌞bronze⌟ work.
15He made two bronze pillars. Each was 27 feet high and 18 feet in circumference. 16He made two capitals of cast bronze to put on top of the pillars. Each capital was 7½ feet high. 17He also made seven rows of filigree and chains for each capital. 18After he made the pillars, he made two rows ⌞of decorations⌟ around the filigree to cover the capitals which were above the pillars.#7:18 Many Hebrew manuscripts, Greek, Syriac; other Hebrew manuscripts “pomegranates.” He made the capitals identical to each other. 19The capitals on top of the pillars in the entrance hall were lily-shaped. ⌞Each⌟ was six feet high. 20Two hundred pomegranates in rows were directly above the bowl-shaped parts around the filigree on the capitals on both pillars.
21Hiram set up the pillars in the temple’s entrance hall. He set up the pillar on the right and named it Jachin [He Establishes]. Then he set up the pillar on the left and named it Boaz [In Him Is Strength]. 22There were lily-shaped capitals at the top of the pillars. He finished the work on the pillars.
23Hiram made a pool from cast metal. It was 15 feet in diameter. It was round, 7½ feet high, and had a circumference of 45 feet. 24Under the rim were two rows of gourds all around the 45-foot circumference of the pool. They were cast in metal when the pool was cast. 25The pool was set on 12 metal bulls. Three bulls faced north, three faced west, three faced south, and three faced east. The pool was set on them, and their hindquarters were toward the center ⌞of the pool⌟. 26The pool was three inches thick. Its rim was like the rim of a cup, shaped like a lily’s bud. It held 12,000 gallons.
27He made ten bronze stands. Each stand was 6 feet square and 4½ feet high. 28The stands were made this way: They had side panels set in frames. 29On the panels set in frames were lions, oxen, and angels.#7:29 Or “cherubim.” These were also on the frames. Above and below the lions and the cattle were engraved designs. 30Each stand had four bronze wheels on bronze axles and four supports beneath the basin. The supports were made of cast metal with designs on the sides. 31Each had a 1½-foot-deep opening in the center to the circular frame on top. The opening was round, formed like a pedestal, and was two feet ⌞wide⌟. Around the opening there were engravings. But the panels were square, not round. 32The four wheels were under the panels, and the axles were attached to the stand. Each wheel was two feet high. 33The wheels were made like chariot wheels. The axles, rims, spokes, and hubs were all cast metal. 34The four supports at the four corners of each stand were part of the stand. 35The top of each stand had a round, nine-inch-high band. Above the stand were supports which were part of the panels. 36Hiram engraved angels, lions, palm trees, and designs in every available space on the supports and panels. 37This is the way he made the ten stands. All of them were cast in the same mold, identical in size and shape.
38Hiram also made ten bronze basins. Each basin held 240 gallons. Every basin was six feet ⌞wide⌟. There was one basin on each of the ten stands. 39He put five stands on the south side of the temple and five on the north side of the temple. He set the pool on the south side of the temple in the southeast ⌞corner⌟. 40Hiram also made pots, shovels, and bowls.
So Hiram finished all the work for King Solomon on the Lord’s temple: 412 pillars, the bowl-shaped capitals on top of the 2 pillars, and 2 sets of filigree to cover the 2 bowl-shaped capitals on top of the pillars, 42400 pomegranates for the 2 sets of filigree (2 rows of pomegranates for each filigree to cover the 2 bowl-shaped capitals on the pillars), 4310 stands and 10 basins on the stands, 441 pool, 12 bulls under the pool, 45pots, shovels, and bowls. Hiram made all these utensils out of polished bronze for the Lord’s temple at King Solomon’s request. 46The king cast them in foundries in the Jordan Valley between Succoth and Zarethan. 47Solomon left all the products unweighed because so much bronze was used. No one tried to determine how much the bronze weighed.
48Solomon made all the furnishings for the Lord’s temple: the gold altar, the gold table on which the bread of the presence was placed, 49lamp stands of pure gold (five on the south side and five on the north in front of the inner room), flowers, lamps, gold tongs, 50dishes, snuffers, bowls, saucers, incense burners of pure gold, the gold sockets for the doors of the inner ⌞room⌟ (the most holy place), and the doors of the temple.
51All the work King Solomon did on the Lord’s temple was finished. He brought the holy things that had belonged to his father David—the silver, gold, and utensils—and put them in the storerooms of the Lord’s temple.

Currently Selected:

1 Kings 7: GW

Highlight

Share

Copy

None

Want to have your highlights saved across all your devices? Sign up or sign in

YouVersion uses cookies to personalize your experience. By using our website, you accept our use of cookies as described in our Privacy Policy